Your cart is empty.
Your cart is empty.Product Description
Bring the deli home, with the added factor of freshness and convenience with this F2C Brand New 7.5 " 150W Electric Food Meat Slicer, with its unique design, power, and construction features, providing the perfectly thin delicate slices of freshly cooked roasts, as well as thick and hearty cuts of cheese, bread, or meats.
It can be used to slice beef, venison, mutton, turkey and ham up to 0.75"thick (19mm) without breaking down the muscle fiber structure.
Adapt this F2C 7.5" Electric Meat Food Slicer to Your Level of Customization-Customize your blade with the universal slice features included in the device.
We went through thick and thin with our MicroSlice controls to ensure your ultimate slice of goodness in every morsel. Avoid pricey, and rubbery, deli alternatives by slicing fresh cuts of meat in the comfort of your home.
Specifications:
-Net weight: 8.4 lbs
-Overall Size: 13.7"x10.6"x11"
-Cutting blade diameter: 7.5"
-Voltage: 120 volt 60 Hz
-Power: 150W
-Slicing thickness: 1-19 mm
Package Includes:
-1x 7.5" Meat Slicer W/ Blade
-1x Manual
Mary
Reviewed in the United States on November 15, 2024
Especial para su uso
angela grail
Reviewed in the United States on January 7, 2024
The only that upsets me on this I'd that my bread gets stuck at the bottom by the blade and I have to turn off after each cut and I have to push it through. The back board at bottom near blade needs to be shorten.
Debra D Haymore
Reviewed in the United States on September 15, 2023
I finally received my item and was very satisfied with it. I apologize for getting upset about not receiving the item on the first attempt. Thanks, Debra D Haymore 09-14-23
Kindle Customer
Reviewed in the United States on December 29, 2023
Won't use it very often but the price was reasonable
Olivia Bane
Reviewed in the United States on January 31, 2023
Only complaint is the thickness gauge or lack there of. A click to know a 1/4, 1/2 etc would be better then a Sharpie mark that I had to make to get consistent cuts.
yitzak
Reviewed in the United States on March 30, 2022
La he usado dos veces para cortar jamón y queso. Para eso la compré, con la idea de rebanar a mi gusto estas dos cosas en mi casa, comprarla entero y de esta forma ahorrar dinero.Pero la máquina no tiene fuerza ni para cortar eso, no quiero saber cortando una carne con hueso. Hay que hacerle mucha fuerza lo que es un peligro ya que se le puede resbalar la mano a uno para la cuchilla, se calienta sobremanera la máquina que enseguida huele a alambres quemados.Para limpiarla es todo un proceso que hasta un destornillador debo usar.Me dieron la oportunidad de devolverla en 30 días, pero tenía mucho trabajo y no pude hacerlo, se me pasó el tiempo. Y aquí la tengo de adorno.
rain
Reviewed in the United States on March 15, 2018
This 10" slicer arrived branded Zeny, so I suspect that all the China-made 10" slicers of this same appearance come from the same manufacturer.This was well packaged - reinforced and banded cardboard box with thick formed styrofoam to hold the slicer in place and protect the contents. The materials in the slicer are good grade and the finish is also. It is sturdy and will take many years of use structurally. Electric components are simple and will likely last as well. When the slicer arrived it had some problems that might make one return it unless there is time and a desire to fix a brand new product. Four issues had to be addressed:1. The upper roller bearing shaft was too long and protruded into the inside front face of the case, preventing full travel of the carriage. I was able to remove a washer from under the bushing and that shortened the shaft for enough clearance. This allowed the full travel of the carriage from spring to spring. 2. The vertical bearings were binding on the foward rail, causing the machine to slide across the counter when in use, I adjusted the rail downward by installing some thin washers between it and the frame to shim it and eliminated the binding. It now has good smooth one hand operation.3. The back plate required adjustment to an even gap between it and the blade from top to bottom. Simple to adjust with the two mount screws at the base of the plate on the lower foward side.4. The thickness adjustment dial was binding and not easy to operate. It was corrected by loosening the four allen-head capscrews that mount it to the frame inside the machine and operates easily now.I am not sure if others have these issues, the manufacturer makes a good quality machine, and it is adjustable for good functionality, however, It seems like they do not have an operational check and adjustment process in place.I rate the quality of components to be good, however, as delivered, for the plug in and go consumer, it is poor because the adjustments necessary for good operation.Overall, after making the adjustments, and putting it to use, it is a good slicer.
Richard Pozzi
Reviewed in the United States on January 29, 2018
After much research, I purchased this slicer! After using it on several different meats and cheeses, (no veggies yet) and going through the cleaning process many times, I'm convinced this is the best slicer between $200-$500 range! Really! The next step up (bigger motor, blade and table) is $1500!! The base on this model tips back a little more, making the slices fall through the back better. It's the goldilocks machine, not too big, not to small. The direction are crap, but slicers are pretty easy to figure out since you have to adjust and take it apart to clean. I'm hooked on thin sliced beef french dip!! Please HELP!!
Recommended Products
$44.99
$ 23 .99 $23.99