Your cart is empty.
Your cart is empty.Product Description
Ready To Use
Ecotex Water-Based Inks are ready to use straight from the container! Simply open the seal and get to printing.
Print on multiple substrates
With Ecotex water based inks you can screen print on more that just t-shirts! Print on substrates such as wood and poster paper.
Bright Crisp Color
Ecotex Snow White is a standalone white water-based ink that produces vivid and crisp color. You can also print with a high mesh count for projects with fine detail.
Non Phthalate Formula
Ecotex water-based inks are formulated PVC and phthalate free and unlike many water based inks on the market today ours also have low odor.
Made In USA
All emulsions, chemicals and inks are proudly manufactured in the USA. Support American economy and families when you purchase from Screen Print Direct.
No Risk
We stand behind our products. Not happy? Simply send it back. See our return policy for more details.
Support
We understand that screen printing isn't easy, especially if you are just starting out. Lucky for you our dedicated support team is here to help you! Send us a message if you are experiencing any issues using our products.
Our Mission
Screen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices.
How To Use:
Flash and Curing Guidelines
Flash and Curing Guidelines:
- Curing should be a minimum of 90 seconds at 320°F. For the best results 2-3 minutes at 320°F.
- Flash at 105°C/220°F - 7 - 12 seconds
Clean Up
Ecotex Water Based Press Wash/Ink Degradant
- Clean excess water based ink on the press, ideal for use between color changes
- Clean remaining water based ink residue from the screen in the sink or washout booth
Pro Tips
Mesh Guidelines: 155-305
For Optimal Use:
- Mist the screen with water during high volume runs to prevent the ink from drying out
- Activate just enough ink for the job at hand (if discharge printing)
Brittany
Reviewed in the United States on February 19, 2025
Good product
Matt
Reviewed in the United States on January 19, 2024
This is a review of the white ink. I agree with other reviewers that it is too thick and clogs the screen. I added 2-3 tablespoons of water and stirred until creamy smooth. It is smoother and thicker than Speedball white ink. If you use a Teflon sheet to cure is comes off as a softer version of plastisol ink. It's bright and white after two passe,s but I wouldn't say it's better than Speedball. I water down Speedball white a little bit as well. Water-based ink evaporates over time so you will need to add a little water from time to time as you get down to the bottom of the container.
Customer
Reviewed in the United States on March 17, 2021
Great product so far. Tried speedball ink & it kept cracking even though I was doing exactly what I should. I switched to ecotex using the same shirt & same exact process with no cracking! So happy
Spoo
Reviewed in the United States on December 26, 2021
Mixed this ink with 5-6% discharge additive and had great results. Put it through our dryer at 300 degrees (in the heat chamber for 90 seconds). Bright colors with a soft hand (after washing). I added a bit of water to the ink as well to improve consistency. Image shown was printed on a black cotton tee.
Miguel Enriquez
Reviewed in the United States on August 24, 2020
I like using jaquard water based ink, but I thought I’d give this a try. It is lighter, and a little too creamy, and it flakes into little tiny pieces as it dries (dries much faster than other inks)It does its job but I still like jaquard ink it’s a little heavier and keeps a thicker consistency longer and I get much longer runs out of it. You’ll just have to work a lot faster with this ink.
Mark V.
Reviewed in the United States on October 8, 2020
So angry about this one. I was hopping to improve cracking on white ink. I was shipped emulsion the first time, second time I received what seems to be correct, however I went to use it and after two passes the frame was clogging. I’m almost certain this is plastisol ink and was mislabeled. I don’t use that so I didn’t have the proper cleaning products needed and now I have a screen that is ruined because I cannot clean it out and had orders that needed to be completed. How do you mess up the product you are shipping out and then mislabel
Matt Jagitsch
Reviewed in the United States on September 15, 2019
I’m an amateur, home screen printer. This water based ink worked great. Good coverage. Drys easily. Nice consistency. All at a reasonable price. I’ll definitely be buying it again.
W
Reviewed in the United States on June 29, 2019
Works perfectly. Just add activator and go. I use this stuff and all the other discharge inks from ecotex all the time and the results are just as good as any other I have tried.
Recommended Products