Your cart is empty.
Your cart is empty. DESCRIPTION:
This spray gun features a 125cc capacity cup and is ideal for small repair work, detailing and hobbyists. This sprayer features pattern, material, and air spray settings. HVLP (high volume-low pressure) technology provides high material transfer efficiency, eliminates paint waste and requires lower air volume. This paint gun is supplied with a 125cc gravity feed cup, with 0.8mm nozzle. This paint gun comes in handy when working with small areas or those tight places that are hard to reach with a larger spray gun. It sprays anywhere from 20 - 43 PSI, a good general pressure to start spraying at is 30 PSI.
Kit include:
Handle Tooth Brush
1/4 NPT female plug
Filter
Respirator
SS454
Reviewed in the United States on July 7, 2024
Sprays good. Cap does not fit/seal tight but so just be aware when tilting.
AJ
Reviewed in the United States on October 19, 2024
This product didn't work and after the seller sent me a replacement it didn't work either so definitely recommend not to buy
Leaking, unusable
Reviewed in Canada on September 3, 2023
The product is unusable, instead of spraying it's leacking.
Josh Dalton
Reviewed in the United States on September 10, 2022
Bought this as a basecoat sprayer for cerakote projects when I need to run multiple colors (more than kne sprayer). I've been pleasantly surprised with how well it has worked for this price point (I wasn't expecting much). It atomizes decently and will get the job done if you are on a tight budget. Hate the o-ring on the air cap (in fact I don't use mine, seems to be doing okay without it). My rating is off the price point and well it performs. It's a cheap sprayer, expect a little splatter occasionally and a bit of fiddling.
Jonathan Herring
Reviewed in the United States on August 15, 2022
The previous cheap Amazon gun that I used to used for Cerakote is discontinued. I recently tried some other cheap one, that was a pile of junk. You could not adjust the paint flow down to zero. This one works great. Full paint flow adjustment. I've done 5 different Cerakote jobs with it, and I am quite happy with it considering how cheap it was compared to an Iwata. This one is worth every penny.
david thiesen
Reviewed in Canada on December 13, 2022
used it to spot paint my bumper. worked very good
Clayton.
Reviewed in Canada on July 11, 2021
good for touch up and almost good enough to be an air brush.
Sheriff
Reviewed in the United States on February 1, 2021
I bought this because it’s the only one I could find with an 0.8 nozzle recommended for spraying Cerakote. This spray gun blew our minds. It’s perfect for use on pistols rifles, actually anything sprayed with Cerakote. I’m a believer in this little gun. You don’t need anywhere near the pricey spray guns recommend for spraying Cerakote. I’m not knocking more expensive spray guns because I’ve never had one. I’ll come back and add some photos with our results. I’m telling you folks you won’t be disappointed in this product. I love it.
JOHN WILLIAMS JR
Reviewed in the United States on April 26, 2021
sprays as good as my awati at a 1/10 of the price, perfect for cerakoting and the filter screens fit perfectly into the cup. my number 1 investment of the year .
Dusty
Reviewed in the United States on May 9, 2020
Love this gun. Other cheap guns gave me runs and clogs. But for the price it is nice. Painting the base coat came out nice and flat.Cons: On the 4-5th painting the fan decreases for some reason and cleaning the the tips very well help. It did give minimum clear coat orange peel but it was easy to sand with 2000, 2500, 3000 grit.The trigger screw comes undone and best to inspect before spraying. For the price it is nice. The mask I used during Covid-19 going in public. I highly recommend a respirator mask for painting .
Leo
Reviewed in Canada on October 15, 2020
It looks good but I haven’t actually used it yet!
Casey Harrington
Reviewed in Canada on April 15, 2020
Not bad for the price
Zigeuner
Reviewed in the United States on September 27, 2019
I used this gun to touch up portions of guitar repairs. It works very well, indeed. Keeping the pressure as 35-40 psi makes for a perfect distribution of nitrocellulose sanding sealers and lacquers. It showed no tendency to clog, spit or leak and is very economical on the expensive products that you spray. You cannot go wrong on this unit for those small touch up jobs. I highly recommend this spray gun.
Recommended Products
