Your cart is empty.
Your cart is empty.
DPP Titanium Rear Sight Mount/Mounting Plate Compatible with Glock Models
It has one of the lowest bore axes in the industry without any alterations on your pistol. Remove the rear sight on your firearm and replace it with our mount in order to mount your Red Dot Sight. You can take our mount off and replace your rear sight at any time. Installation hardware and tools included(304 Stainless Steel Anti Flicker sealing plate included).0.13"saddle height. One-Piece Design, Lightweight. This provides a steady sturdy and rugged mount that will hold your zero, We focus on improving every detail.
Compatible with:
9mm model: 17、19、26、34、45
.357 model: 31、32、33
.40 model: 22、23、24、27、35
.45 Auto model: 21、30、36、41
.45 G.A.P model: 37、38、39
10mm AUTO model: 20、29
Not fit all mos model
Compatible with Red Dot Sights (Mounting Screws INCLUDED):
Trijicon RMR/SRO
Holosun 407C/507C&508T
Installation Instructions:
Remove the rear sight
Slide mount plate into rear sight dovetail *May need press or rubber hammer
Tighten dovetail socket set screws
Place the red dot sight on mount plate then tighten the mount screws
Customer
Reviewed in the United States on March 13, 2025
Well packaged. Instructions were clear and to the point. Fit my glock 19 gen 3 perfectly.
Colbie l.
Reviewed in the United States on January 4, 2025
Fits Glock 43x perfect. No issues.
Boonett
Reviewed in the United States on January 20, 2025
Mounted to Glock 20 with Holosun 507c. Fit perfect. Now need to take to range and see how it holds up. Had no issues at all mounting. I got the titanium.
dmac
Reviewed in the United States on January 16, 2025
Minimal fitting, used a pusher. Second one I've used from this company. Holsun and Burris on Glocks. Good fit. There to stay.
William G. Scales
Reviewed in the United States on August 28, 2024
This is exceptional in quality and fit. I was able to install this on my Springfield Armory XD9, but had a gunsmith install a second adapter on a Glock. 22 Only because I didn’t have the right tools to remove the factory site. The fit is extremely tight and requires precision on your part to fit it appropriately, but once fitted, it’s very secure and allows the Holosun site to be installed seamlessly.
Gary Fregeau
Reviewed in the United States on November 12, 2024
No problem installing and mounting Halosun green dot to my 44 Mag
The Whiz
Reviewed in the United States on May 7, 2023
I purchased this because I have commitment issues. I'm not sure if I'll like a pistol red dot and I'm not sure I want to have my slide milled.This plate installed easily, but you will need a plastic faced mallet or sight pusher. It is a tight fit in the dovetail. It took a good bit of whacks to get it in place. I suggest finding the center of your slide and making a small crayon mark on the back. Find the center of the plate and make a crayon mark. Set the plate using the marks to center the plate.The supplied screws mated up perfectly and my holosun mated perfectly to the plate. I used a torque screw driver and used 15 inch/lb on the set screws and per manufacturers instructions, on the screws mounting my holosun to the plate. If the weather holds, I'll go to the range to zero today. As for holsters, both the factory Glock sport combat and Fobus paddle holsters work with optic installed.
wayne leonhardt
Reviewed in Canada on December 13, 2023
This plate does not fit the Canik To9sa! No good to us at all
Tom C.
Reviewed in the United States on June 28, 2021
Update:The manufacturer/seller reached out shortly after my original review was posted and offered to replace/refund my defective mount even though it was past the 30 days. This is a first for me. I have increased my review to 3 stars based on the quick and courteous response from DPP. Will try them again in the future if/when I need another mount.Original review:I thought this was going to be as good as their doctor/venom mount plates, BUT it is not. I actually returned 2 Holosun 507c and almost a 508t optic thinking they were defective. Turns out the 507c's were probably good and I know the 508t is. The problem...This mount was/is the issue. Turns out the rear dovetail is angled down towards the front and if you use the screws it raises the back even further. The results...The optic can only be sighted at 3 to 4 yards and closer. Turning the elevation all the way to the right and the closest you can get to the 2 moa dot is the top of the 32 moa circle at 7 yards.You can compensate somewhat by using the 2 included anti-flicker plates, but with them both used the front posts are barely in the optic. I am glad I happened to figure it out, by complete accident mind you, before sending the 508t back. You can actually see light between the slide and plate in the back and if you use the screws to secure it you can see light in the dovetail where the screws meet the cut in the slide. That is when they are even with the plate!I may have gotten a bad one, but I wanted to get it out there. If you get one of these and you are unable to line your new RMR optic up at a distance beyond 3 or 4 yards, it is this mounting plate, not the optic!I am so glad I went with the option from DBTAC. Besides sitting flat on the optic it has backup iron sights. My advice, stay away from this mount! It is solid, but that is it. Too bad I didn't figure this out in time to return it. Going in the trash!
Recommended Products
