Your cart is empty.
Your cart is empty.
DPP Titanium Mounting Kit/Anti Flicker Sealing Plate Kit Compatible with Trijicon RMR
- One must have this kit to mount your sight on a MOS slide - Original two long screws will NOT work; You will need the custom .390 Length Mounting Screws in this kit.
- When you buy an reflex sight(Compatible with RMR), it does not come with the sealing plate. With the Seal plate installed, it can be submerged up to 66ft. for at least one hour without leakage.
Compatible with:
All Glock MOS Models
Springfield OSP Models
CZ P-10 C/F/S Optics-Ready
Any other firearm or mount that Compatible with Trijicon RMR/SRO
* Some cut slide use #4-40 screws, the screws come with this kit will not fit.This kit is NOT FIT copycat red dots.
Mounting Hardware:
1x regular sealing plate
1x anti-flicker sealing plate
6x #6-32 custom .390 Length Mounting Screws (proper screws compatible with an RMR on the Glock MOS and Springfield OSP slide)
*Gen 1 Included two rubber places
Made from 304 stainless steel
Weight:2.8g
Uriah Wilson
Reviewed in the United States on March 14, 2025
Just get them. And thank me later. Perfect fit.
JD
Reviewed in the United States on September 4, 2024
This is a great value - the plates, screws, and tool are very high quality!!!
Shawn E. Miller
Reviewed in the United States on August 2, 2024
I needed replacement screws for a tru glo red dot. The description says the plate that come with it will fit all model glocks. It does not fit a Glock 17 frame with rmr cut out. The screws were a little bit long but worked. I didn’t necessarily need the rubber plates but would have installed them if they would have fit.
MickySFV
Reviewed in the United States on July 14, 2024
I mean, other than the anti-flicker. You also get a Standard Seal plate so if you just need to have a plate that extends over the edge of your slide like your Red dot without the flicker indent you’ve got one for literally $2 more than just a single plate?! You can’t beat that even if you just Have it as a spare for The price you can’t beat it!? I got mine for my Viridian RFX-35 for my G26! Works like a charm! Would highly recommend this to anyone! Super easy self-explanatory, and even came with extra screws and a tool!
JHamm
Reviewed in the United States on February 7, 2024
I needed to attach a RMR and at the last minute found that Trijicon does not include a sealing plate with the RMR. Trijicon is a great company with great products but they should have included the plate with the RMR. I called several local stores and no one had them in stock. Ordering from Trijicon would take over a week. Luckily, I found this plate, bought it and had it in 2 days. I was worried about quality and fit, but it mounted correctly, is solid steel and works great.
J. King
Reviewed in the United States on December 19, 2024
Fit my G22 slide just fine works great. Would buy again if needed.
C. C
Reviewed in the United States on October 4, 2023
After purchasing an RMR sight, I realized that I needed a base plate for it. After researching various options, I came across this RMR Universal Rear Sight Plate Base Mount for Red Dot Sight Optics Mount. This product stood out as the most affordable option with solid reviews. I installed it on my PSA Dagger with RMR cut, and it fit perfectly, took less than 15 minutes. I highly recommend this item to anyone looking for a reliable and cost-effective base plate for their RMR sight.
Harold
Reviewed in the United States on December 21, 2019
Have you ever bought something on Amazon and then, while eagerly waiting for it to arrive, wished you hadn't bought it? That's exactly how I feel about these plates. While they were in transit, I kept thinking, Trijicon is a reputable company, they've had so many iterations of the RMR, you'd think waterproofing would have been the first obstacle to tackle... Additionally, my RMR that I'm using is the RM04... No electronics, why do I need this plate? The answer is I didn't... But looking at my RM04 dimensions, the gasket that's suppose to keep the water out, hangs over the sides (both of them) of my Gen 5 Glock 19 MOS. The base of the RMR is too wide. I don't remember having a water issue with my RMR on active duty... Then it hits me. We used them on top of a Sig or an HK... Those slides are fat pigs compared to the Glock 19. This plate does a great job of sealing the gap. But I'm sure you're still wondering, why would a guy with an RM04 need a waterproof plate? It's not like an RM06 with the exposed battery compartment. The feature that makes this purchase worth every penny, was the 6 proper length screws to mount the RMR to the MOS plate. I honestly have no idea what trijicon is thinking you're going to mount this optic to, but the screws provided with by RM04 are a half inch long... You'd cut your dang fingers of trying to shorten them enough for them to not push the MOS plate skewed. And if you're smart, you'd spend all night using a file, but either way, you're taking part of your finger, or pliers, or whatever you get to hold the screws off with the screws. $10 for 2 water resistant plates and 6 proper length screws. It's worth it all day... No messing up my tools or fingers to make a $400 site work the way it's suppose to. No driving to the Lowe's or Home Depot or scouring the internet to try to find replacement screws with the correct length and thread pitch. That, my friends, that's what makes this worth every single one of those 1000 pennies. 😉
Recommended Products
$45.95
$ 22 .99 $22.99