Your cart is empty.
Your cart is empty.This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford Expedition: 1997, 1998, 1999, 2000, 2001, 2002] - [Ford Explorer: 1995, 1996] - [Ford F-150 Heritage: 2004] - [Ford F-150: 1997, 1998, 1999, 2000, 2001, 2002, 2003] - [Ford F-250 HD: 1997] - [Ford F-250: 1997, 1998, 1999] - [Ford Lobo: 1998, 1999, 2000, 2001, 2002, 2003, 2004] - [Lincoln Navigator: 1998, 1999, 2000, 2001, 2002]
TechConsumer
Reviewed in the United States on February 10, 2021
These solenoid valves did not have sufficient pull to open the vacuum to my vacuum actuator. They show they are getting power from signal but did not work to supply vacuum. Replaced with Motorcraft OEM which worked just fine.
Robby Walker
Reviewed in the United States on July 10, 2020
Worked exactly as it should for 2002 Ford F-150
Customer
Reviewed in the United States on February 20, 2020
This was the fix for my Four-Wheel Drive. YouTube has videos on how to diagnose. Make sure the keyed connector on your truck matches the connector on the solenoid. Some are keyed on the bottom, some on the side. This one fit my truck perfectly.
Customer
Reviewed in Canada on February 16, 2020
Works great on a 2010 ford.
GeneralZod
Reviewed in Canada on September 14, 2019
Seems to be of good quality. Unfortunately, it was the wrong unit for my truck. Had to reordered the correct one.
More Cowbell
Reviewed in the United States on May 4, 2019
Used this to replace a failed air valve for my F150's front hub actuator. The electrical connector on my 2001 didn't fit this at first, as there was a plastic keyway on one or the other that prevented insertion. A quick removal of that tab with a dremel, and tada the connector fit and the valved worked great.
Mr N
Reviewed in Canada on December 10, 2019
got 4x4 again!!
Brad Heidman
Reviewed in Canada on November 2, 2019
Worked great was a direct replacement for the 4 wheel drive vacuum solenoids on my 2002 Ford F-150
Chris
Reviewed in Canada on December 18, 2018
Very good
Kevin S
Reviewed in the United States on May 11, 2017
Heard a strange noise from under the hood when the motor was taxed a little bit, but not when it was on a flat. I replaced this solenoid and a vacuum valve and the problem went away. Dealer wanted to replace the hub lockers and charge me $1200. Glad I tried this first.
Randy cmintyre
Reviewed in the United States on April 3, 2017
WORKED AS EXPECTED
Gregg
Reviewed in the United States on September 24, 2014
Works good, Installed in minutes. My front diff would not engage. I didn't know if it was the 400 or the 401 valve. Mounting bracket that comes with the 401 made up my mind. That bracket is like the one you get from Ford. I would recommend replacing Dorman 600-400 at the same time.
sam
Reviewed in the United States on February 16, 2014
It worked just like the original part. It was very easy to install and works great. I would recx4 solonoids.ommend these parts to anyone who needs to repare 4
Recommended Products