Enjoy free shipping on orders over $29.99

US Dollar

0 $0.00

Your cart is empty.

DASBET 7L Fluid Extractor Manual Oil Changer Vacuum Hand Operated Engine Oil Change Fluid Extractor Hand Pump Tank Remover (7L)

4.3 (10) Write Review

Free shipping on orders over $29.99

$41.99

$ 21 .99 $21.99

In Stock

Qty.:

Complete Fluid Extraction Solution: The vacuum fluid extractor is equipped with four tubes of varying diameters that can easily reach the bottom of the oil pan. This versatile fluid extractor allows for the efficient removal of fluids ranging from engine oil to brake fluids. With its generous 7L reservoir and additional hoses, you can effectively access the deepest parts of the reservoir and extract every last drop of oil.
Specifications: Fluid temperature range: 35°F- 200°F/1°- 95°C; polypropylene hose diameter: 4mm / 6mm / 8mm / 10mm (0.157"/0.236"/0.315"/0.393"); Tank Capacity: 7L; Actual capacity 6.5L; Working pressure: 70-170 PSI.
Easy Operation: Simplify the process of changing engine oil and transmission fluid with the convenience of the oil extractor. Simply open the hook, insert a suitable hose into the oil pan, and let the oil extractor pump do the work for you. Not limited to places, change oil anytime, anywhere.
Wide Application: The 7 liter oil extractor is constructed from composite materials and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. The oil extractor pump is also suitable for low viscosity fluids such as water.
Package Included: 1 X 7L Oil Extractor 1 X Φ10mm Nylon Hose 1 X Φ8mm Nylon Hose 1 X Φ6mm Nylon Hose 1 X Φ4mm Nylon Hose 1 X Instruction Manual. Note: If you think the length of the hose is too short, these 4 hoses can be connected to each other and used together, wrapped with tape to avoid leakage.

Product Description

Through the hand pump tank remover, you can extend the main tube by connecting with extension tube to reach the bottom of the reservoir and suck up every drop of oil.

Specification about the Manual Oil Extractor Pump

Color	White
Fluid Temperature Range	35°F- 200°F/1°- 95°C
Packing Size	26.8X12.1X8.3 inch
G.W.	7.74lbs
Capacity	7L

Extraction	Warm or cold fluid
Drive Mode	Manual
Construction	Handle, Hose Storage Tank, Sump Tank, Base, Hoses
Package Included	1 X 7L Oil Extractor, 1 X Φ10mm Nylon Hose, 1 X Φ8mm Nylon Hose, 1 X Φ6mm Nylon Hose, 1 X Φ4mm Nylon Hose, 1 X Instruction Manual
Extension Hose	If you think the length of the hose is too short, these 4 hoses can be connected to each other and used together, wrapped with tape to avoid leakage

Operation Instructions

Ensure the vehicle is on level ground and run the engine for approximately 5 minutes to warm the oil and allow any contaminants within the oil to thoroughly mix and turn the engine off.
Remove the vehicle's oil dipstick.
Connect the main suction tube to both the pump inlet and probe.
Raise the handle to its highest limit and pump it fully several timea to create a vacuum which will automatically begin to extract the oil/fluid. Observe the oil/fluid as it rises up the chamber and stop pumping when the fluid is 6"(150mm) from the top. The unit will continue to fill and will automatically shut off when the internal pump after the unit has shut off this way result in liquid entering the inner pump chamber. If this should occur refer to section 7 on how to expel fluid from the pump.
Once completed, remove the main suction tube from the pump, pour the oil/fluid into a suitable container and dispose of it in accordance with local authority regulations. DO NOT over tip the extractor when emptying it as this may cause fluid to enter the inner pump chamber. Before using the pump again press the vacuum release valve for 5 seconds to release the vacuum within the pump. This valve is situated on the top of the unit underneath the handle.
In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows. Firstly press the vacuum release valve for 5 seconds to release the vacuum within the pump. Seal off the fluid entry/pouring hole by placing your hand over it. Then pump the handle up and down several times. Any fluid that had entered the pump will be expelled from the air valve on the underside of the unit.

Adam AKA Kaz

Reviewed in the United States on February 10, 2025

Peice of junk! I have used this a total of two times. On 2nd use it started leaking from the bottom of the housing. Save your money and find a better vendor or unit.

Fernando

Reviewed in the United States on March 16, 2024

Works pretty good

mellow

Reviewed in the United States on April 24, 2024

Works well but you gotta play around with it to suck out all the oil, stick the hose in and out and then pump some more. One annoying thing is the hose tend to fall out a little bit so it needs to be snug some more. Afterwards you can take the whole thing to the auto parts store to recycle the oil.

Customer

Reviewed in the United States on September 2, 2023

Great for removing oil

Roberthoman

Reviewed in the United States on August 3, 2023

Nice heavy duty worked great for removing oil out of my Yamaha trolling motor

Steve in the Rockies

Reviewed in the United States on July 5, 2023

What a waste of time. Pumped for 1 1/2 hours. Move the extractor oil over trying to find paydirt. Results: 2 liters and one gashed finger off a sharp edge of plastic near the pump handle. Do yourself a favor. Stay away from this mess.

Raymond T

Reviewed in the United States on October 23, 2022

After hurricane Ian my generator ran 16 hours a day for a week. I used the extractor to change the oil in it with great ease. Will use it to change oil on 2005 smartcar when due. No drain plug on that engine. The pump worked effortlessly.

Othon Islas Weber

Reviewed in Mexico on September 14, 2021

Muy practica y fácil de usar

Patrick Melo Modesto

Reviewed in the United States on November 4, 2021

Use YouTube to understand how it works. The instructions are useless

Glen Kudar

Reviewed in Canada on November 20, 2021

The extractor works great!! and is easy to use. On my small car it took one minute 45 seconds to extract about 4 litres of oil. On my son's truck it took about 5 minutes to extract 7 litres.

Shopping Cart

Your cart is empty.

DASBET 7L Fluid Extractor Manual Oil Changer Vacuum Hand Operated Engine Oil Change Fluid Extractor Hand Pump Tank Remover (7L)

Product Description

Specification about the Manual Oil Extractor Pump

Operation Instructions