Your cart is empty.
Your cart is empty.Product Description
Package includes
- Assembled Extruder Hotend Kit;
- Capricorn Bowden PTFE Tubing;
- Silicone Cover×2;
- 0.4mm Nozzle×2;
- 2 Pair Pneumatic Couplers.
Upgraded Hotend Kit for Ender 3
All metal hotend, with good workmanship, can be installed easily.
Fit for Ender 3, Ender 3Pro, Ender 3V2.
Comes with a heating tube and a thermistor. Effectively resolve the blockage, leakage, terminal runaway, etc issues.
Good Connection
Pneumatic connector and clip ensure the PTFE tube and hotend kit in a good connection
Precise thread
The precise thread will not leak filament, and fix the nozzle tightly
Spare parts
- 2 Brass nozzles,
- 2 Silicone covers
- 4 Pneumatic Fittings
Specification:
- Material: Aluminum & Stainless Steel & Brass
- Installation type: external thread connection
- Nozzle size: 0.4mm
- Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)
Jake
Reviewed in the United States on March 5, 2025
Was a great stock replacement. Clogging decreased but still occurred occasionally. Good value item.
Tyla Chadwick
Reviewed in the United States on January 24, 2025
The first issue I had was when I opened the box and saw the state of the item. The red cords are all kinked and looked worse for ware. Also, be warned this product doesn’t come with any of the screws to be able to replace out the part so you have to use the original screws for the head. Which to me at first I was like “okay no biggy”Then comes the instillation process which I had multiple problems with the product.The first issue was the ends of the red wires were already fraying and frayed even worse when I got it installed into the ender printer I have. Which was frustrating but I was fine with it as long as it would work.Now, comes in the real issue. After I installed the part completely. I now have an annoying error where it states that “the nozzle is too higherature.” After doing research on this error I have never once seen before, it’s said that it would be the thermistor screw being the culprit. I did everything that was said online for loosing it and tried tightening it. Still continue to have the same error popping up.Then I took a closer look at how my old wires on that piece were connected to the heating element. And I compared to the new wires and have discovered that during manufacturing the wires must have been sealed too close together for the red wires. So, that could be the culprit as well.But, At this point I’ve been working on my 3D printer for weeks and now my 3D printers even more unusable.What started as some broken fillement in my 3D printer and deciding to just get a better heating element and new tubing with it; has now evolved into a part that’s supposed to “fix” the issues into creating an even bigger issue.And with the return policies and being limited on my own time at the loss of the time trying to install I’m just accepting this as a complete loss.Definitely a waste of money. Definitely disappointed.
William
Reviewed in the United States on September 16, 2024
I have an ORIGINAL Ender 3, super old and needed a new hotend for it. This one works perfectly fine, no complaints from me! It plugged straight in, exact swap for the original Ender3.
Christopher Elledge
Reviewed in the United States on July 12, 2024
I got a hotend to repair a clients printer. The first hotend was reading as being shorted and showing 358 degrees. I requested a replacement and the new thermistor was having the same issue. This is most likely because the screw holding on the thermistor was a little to tight from the factory. To solve this slightly unscrew the screw holding on the thermistor and it should start reading correctly. Other than that, its priced very competitively and is a direct drop in replacement.
Speech Girl and Tech Guy
Reviewed in the United States on June 30, 2024
My original Ender 3 Pro hotend lasted for less that 100 hours before it stopped heating to temp. I bought this as a replacement. It took maybe 30 minutes to install and I was back in business . I had expected this to be an equal replacement but it is better. I was in the middle of printing multiple quantities of the same piece and the pieces printed with this new hotend are smoother and just look more professional. Same gcode file, nothing changed in the settings, just new hotend.
Alex S
Reviewed in the United States on March 7, 2024
After 5 years of use, the hot end on my Ender 3 began flaking out (rougher wall finish/layers and poor PID tuning). I attempted to fix the stock hot end by disassembling and applying a higher heat rates thermal paste but it did not improve it (side comment: buy boron based paste or you are going to end up with a cement block).I bought this primarily because of the inclusion of Capricorn tubing, longer wire lengths and installed connector on the thermistor.I reworked mine with the hot end mod (separate Bowden tube). This is a really simple fix that, in my opinion, drastically improves the sealing and performance. I have had zero leaks since moving to this and greatly improved surface quality.After installing, filament went through easy, temps went back to being stable and most of all my surface finish went back to what it used to be. We will see on long term durability.
Austin Powell
Reviewed in the United States on October 9, 2024
Installation was relatively easy as this is basically a drop in replacement for the whole hot-end and wiring. I only purchased because the thermistor cord on my old one broke and I thought at the price, this was worth trying out. My first calibration test came out flawless.
Tracy Kidd
Reviewed in the United States on October 31, 2024
Good replacements parts
Luis Felipe
Reviewed in Mexico on September 2, 2023
El producto esta bien cumple con su función.Pero no es lo que describe el vendedor, solo tenia 2 cubirtas de silicon, 5 boquillas de 0.4mm y el tubo es bouden y no PTFE como lo indica, fuera de eso todo esta correcto con el hotend
Josué Muñoz
Reviewed in Mexico on January 9, 2022
Es un buen repuesto para mí Ender 3 pro y va como nueva.
perraut laurent
Reviewed in France on November 1, 2020
Sonde de température ne fonctionne pas
Recommended Products