Shopping Cart

Your cart is empty.

Your cart is empty.

Cable Matters Wall Mount HDMI Extender with TCP/IP - Up to 300 Feet, 1080P, 1-to-Many Setup, HDMI Over Ethernet Extender (Model: 103002)

Free shipping on orders over $29.99

$99.99

$ 48 .99 $48.99

In Stock

About this item

  • 300 foot HDMI extension - extend any audio/video HDMI connection between a computer, Blu-ray player, media streamer, or gaming console to a HDTV, monitor or projector over a single Cat 6 UTP/STP cable with this HDMI to Ethernet adapter converter; HDMI over Cat5/Cat6 cabling operates up to 300 feet; HDMI Balun Extender boxes are surface mountable with included brackets and screws; Comes with bonus 2-Pack of High Speed HDMI cables
  • Digital integrity multiplied - connect directly with a single cable or through a dedicated unmanaged network switch over Cat 6 cabling; Do not connect through a LAN or router with other data traffic; Connect up to 8 additional displays by adding Receiver Boxes (sold separately) through an unmanaged, dedicated Gigabit Ethernet network switch without QoS such as the TP-LINK TL-SG1005D Gigabit Desktop Switch; Lab tested with the TRENDnet 8-Port Unmanaged Gigabit Switch, TEG-S81g
  • Control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC channel for convenience and security; The Ethernet to HDMI adapter converter is compatible with HDCP compliant equipment for viewing copy protected content and integrating with HDMI switch, splitter, or matrix equipment
  • Vibrant video & authentic audio- the HDMI extender over Cat5e/6 supports video resolutions of 1080p/1080i/720p/576p/576i/480p/480i at 50/60 Hz; The HDMI to Cat6 converter also supports HDMI High Definition audio for a full range of audio types, including SACD, DVD-Audio, DTS-HD Master Audio, and Dolby TrueHD
  • AC powered HDMI to Cat5 converter eliminates voltage drop with low-power HDMI ports to increase the connection distance; Cat6 to HDMI converter chipset provide auto adjustment of signal feedback, equalization, and amplification for an error-free transmission; Plug & Play without any dip switch settings; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference



Product Description

1

Long Distance Viewing

The Cable Matters HDMI Extender with IR Control is the ideal solution for connecting equipment in remote locations up to 300 feet apart with a single Cat 6 cable. These Extenders convert the HDMI signal using TCP/IP over a single Cat 6 cable or an unmanaged, dedicated network switch. Applications include digital signage, houses of worship, classrooms, boardrooms, conference room projectors, gaming, video production and more.

Easily Add More Displays

Connecting up to 8 displays is as simple as connecting additional Receiver Boxes (sold separately) for the HDMI Extender Transmitter through an unmanaged, dedicated network switch. Each display can be located up to 300 feet from the Transmitter box.

Customized Installation

Customize your installation with a flexible Cat 6 cable terminated to the perfect length with the unshielded, shielded, in-wall rated, or plenum rated construction that meets your building code. Connect to an unmanaged, dedicated network switch and utilize existing building wiring. Locate the HDMI extenders up to six feet from each end with the included High-Speed HDMI cables and mounting hardware.

Important Notes

- Compatible with an unmanaged, dedicated network switch

- Use shielded cable for longer lengths or in a high RFI/EMI area

cable matters HDMI

Cost-Effective and Easy to Deploy

  • Plug & Play installation, no software drivers required.
  • Use existing Cat5/Cat6 cabling.
  • Extend & split with an inexpensive network switch
  • Cost-effective alternative than using an HDMI matrix or a splitter
  • Add more displays with additional receivers (Model 103002R).

Cable Matters 1080p HDMI extender

High Definition Video

  • Supports up to 1080p @ 60Hz.
  • LCPM, DTS Digital, and Dolby Digital audio.
  • No separate audio cable required.
  • Compatible with HDCP compliant equipment.

HDMI Extension Adapter

Reliable Transmission & IR Control

  • Includes IR Tx & Rx cables.
  • Uses your existing HDMI source remote.
  • Control the video from the display location.

3

Surface Mountable

  • Weighs less than 8 oz.
  • Mounts with included brackets.
  • Includes 2-pack 4K rated HDMI Cables.

Receiver Box for HDMI Extender Over Ethernet Cable

Check for Compatibility

  • Displays must be connected directly to the Rx box. The extender is not compatible with HDMI to VGA adapters, HDMI capture cards, or A/V streaming mixers like the Roland Streamer due to HDCP compatibility issues

5

Package Contents

  • 1 x HDMI Transmitter & Receiver.
  • 2 x HDMI Cables (6').
  • 2 x 5V DC Power Adapter (5').
  • 1 x IR Transmitter & Receiver (5').
  • 4 x L Mounting Brackets & Screws.
  • 1 x User Manual.

Steve
Reviewed in Canada on February 4, 2019
Unit work well. My distance was 260 feet as so far no issues. Would definitely recommend.
William M.
Reviewed in Canada on August 30, 2018
This is the one to buy if you have any switchers or systems involved in your Cat 6 transmission. Our Control 4 smart home did not work with other brands, and I had to return products. 2 weeks with this one, and flawless so far.
Jason
Reviewed in Canada on July 11, 2018
Works great. I have a 180ft cat6 run from my dvr in one building to another building. At the receiver end I'm using a hdmi splitter to to view my cameras on 4 tv's. So far so good.
Chaom
Reviewed in Canada on January 4, 2018
My setup is Shaw satellite, my Gica steamer, and Sony bluray. Fed through a Yamaha ysp 5600 sound bar and a hdmi splitter( 1 out to tv and 1 out to Cable matters hdmi) I used a Cat 7 (10meters) to the receiver and then hdmi out to Optoma projectors . I had all hooked up and just hit the reset button on the transmitter and voila 1080p 60hz. Very easy. Now the ugly hdmi cable is not longer under the rug. Oh I drilled two holes thru the floor board to run the cat 7 cable.
CD from BC
Reviewed in Canada on May 17, 2016
OK, finally one of these sets that WORKS out of the box.I've tried three different versions of this balun. My ex-phone subcontractor got me turned onto this technology - except he couldn't get it to work with the new CISCO box that was supplied by my telco. The baluns, also purchased on this site, would support the ethernet signal/HDMI cross over but would not work for the IR control. We tried every configuration, and even had the vendor replace the units. Zip. Nada. No IR control, but I got a picture, and iffy sound.Tried another set of baluns, and they worked (sound OK, picture great) but no IR control. Troubleshot the system with the OEM and got nowhere. I wound up supplementing that balun system with additional IR control on one of my units to get it to work.This system (ordered in the midst of frustration) works STRAIGHT OUT OF THE BOX. Hoooray!!!!This is definitely the way to go, and only one CAT cable is required between the ports. Got 1080p no sweat. Sound awesome. IR control faultless.This is the way to go!
Dmitriy
Reviewed in the United States on January 15, 2016
Let me first start off by saying that before buying these, i purchased many other HDMI Cat6 extenders that were cheaper and boy did i regret that after buying these! My initial project consisted of running two cat 6 cables (from cable matters, High Performance Cat6, 23 AWG, UL Listed, CM Rated, 550 MHz ) that were connected to a CCTV DVR down a building and to the second floor to a TV. The distance was about 130-140 feet. I purchased HDMI cat 6 extenders from brands like Monoprice ($59), Sabrent ($39), and Portta ($17) which i had some laying around from other projects. Monoprice claims to be working at up to 196ft and Sabrent claims to be up to 200ft. That was not the case for me at all! Both Monoprice and Sabrent would show "no signal" on the TV, there was absolutely no connection, and this is at 130-140ft mind you. I even tested multiple units since i ordered more than one, still nothing. So i thought what the heck, let me try these cheap $17 Portta extenders (98ft range) while im waiting for the new ones to arrive and see if they show anything AND to my surprise, they actually had a signal!! However, it was all purple and distorted with noise and lines, and the image was almost non recognizable, so i had to keep looking and was now willing to spend extra money to actually get something that works.I came across these Cable Matters HDMI extenders and bought two. They came a day later and i installed them and they worked perfectly! The image is excellent (CCTV monitoring) and the overall quality and build of the units is superb! The units are very robust and come with mounting brackets so you can easily mount them on a wall, or use double sided adhesive tape if you don't want to drill any holes. Packaging is also very nice and organized and makes the product feel very high quality. The great thing is that they only run on one Cat6 cable compared to the cheaper ones that required two cat6 cables going from extender to receiver. So if you're looking to run cat6 over 100ft in length, i would STRONGLY recommend these because as i mentioned before, the brands claiming to go up to 200ft did not even do the job for me at 130-140ft. Also, my experience may differ from those looking for audio and perfect movie image quality because in my situation, audio is not needed and image doesn't need to be perfect 1080p therefore i can't make any guarantees about that. Although, if you read some other reviews, people claim that it has very good image and audio quality over longer distances. Besides that, don't make the same mistake i made, spend a little extra and you'll get what you paid for. Hopefully this review helps prevent the same mistake i made. Buy these, don't think about it! It'll save you time and headaches in the long run.
B Fish
Reviewed in the United States on October 9, 2015
Researched several hdmi extender and hdmi switch options, especially those on monoprice. During construction of our home, in desired tv locations, I ran multiple cat 6 / rg6 cables to a central location to ensure I had options. Already with 5 directv receivers I did want not to add more dtv receivers but still wanted several more locations such as the deck, garage and master bath to have tv. Given the price of hd baseT or other single cat 5/6 options I wanted something more economical. I had tried a too good to be true cheap option before and had no success. I came across these newer hdmi over single cat 5/6 with tcp/ip capability to share a single signal/transmitter across multiple receivers/tvs via gigabit switches.As I did not need to view different programs on the tvs (in fact during football season I wanted the same program on the garage and deck tvs) this solution seemed to be exactly what I needed. I was somewhat skeptical but figured I would give it a shot. I ordered this package which included 2 hdmi cables as well, and I also picked up an extra receiver for a second tv location.It worked instantly when I connected the first tv directly tx to rx (about 100ft cat6 run). The IR capability also worked perfectly. I then tested the second reicever with same results (40ft cat6 run). I then tried both tvs via a gigabit switch I had picked up...fail. It seems the only way to contact tech support is email ... But they did respond after a couple days. After a couple exchanges (not quick to respond but they did respond) it was determined my switch was 'smart' and had QOS and this requires a dumb/unmanaged switch. They recommended a Trendnet gigabit switch that is about $20/25 for 5/8 port versions. It arrived tonight and solved the problem! Both tvs display the signal and pass ir signals no problem.The picture quality is more than acceptable (not perfect) and my only complaint is that on some channels/program types (live sporting events) the frame rate or something is just a bit different looks less 'natural'. I can't verify for sure but it does seem able to both 1080p/720p signals independently and I haven't tried both tvs on different settings at the same time. Again, this is not my home theater and for about half the price of an hdbaseT option I have HD picture on 2 tvs, picked up the needed switch, and could still add almost 2 more receivers (will be adding soon now that I have it working) for a total of 4 tvs for the price of one hdbaseT solution!If you are ok with the same source on multiple tvs, want good but not flawless picture, and the simplicity of using a single cat6 cable with ir capability do not be concerned with this solution .. It works as advertised!
Recommended Products