Shopping Cart

Your cart is empty.

Your cart is empty.

BMPCC 4K / 6K Cage with NATO Handle + T5 SSD Mount Clamp for Blackmagic Design Pocket Cinema Camera 4K / 6K

Free shipping on orders over $29.99

$83.99

$ 35 .99 $35.99

In Stock

About this item

  • MagicRig Cage Kit only for BMPCC 4K & 6K(Not for BMPCC 6K Pro & 6K G2, Not for BMCC 6K Full Frame). This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting.
  • Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories.
  • T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws.
  • It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories .The handles are easy to transport and offer more convenience for low angle shooting.



Product Description

cage

BMPCC 4K / 6K CAGE

Fits Blackmagic Design Pocket Cinema Camera 4K & 6K(Not for BMPCC 6K Pro & 6K G2, Not for BMCC 6K Full Frame). It would not block any buttons on the camera and you are able to access not only the battery but even the sd card slot.

handle

NATO HANDLE

Except for sliding it left and right on the NATO rail to balance the camera's center of gravity, the handle is back and forth adjustable for you to find the balance position of your rig

t5

T5 SSD MOUNT

Mount for Samsung T5 SSD, Compatible with any Brand Camera Cage as long as there are two 1/4'' or two M4 screws.

BMPCC 4K 6K

  • Compability: For Blackmagic Design Pocket Cinema Camera 4K / 6K(BMPCC 4K / BMPCC 6K)
  • Not for Blackmagic Design Pocket Cinema Camera 6K Pro / 6K G2(BMPCC 6K Pro / BMPCC 6K G2)
  • Not for Blackmagic Design Cinema Camera 6K (BMCC 6K)

About the Product

  • Cage Dimensions: 193 x 75 x 115mm
  • Materials: Aluminum Alloy
  • Camera Screw Type: 1/4''-20
  • Type of Hole Bolt: 1/4''-20, 3/8''-16, M4
  • SSD Mount Screw Type: M4
  • Anti-twist plate Screw Type: 1/4''-20, M3

Package Includes:

  • 1 x Cage
  • 1 x NATO Handle
  • 1 x T5 Holder
  • 2 x M3 Screws
  • 2 x M4 Screws
  • 2 x 1/4'' Screws
  • 3 x Hex Spanners
  • 1 x Plate with Locating Pins

Dino Suave
Reviewed in the United States on January 6, 2025
Great cage, small rig makes some lovely products and this doest fall short. fits perfectly.
Kodi
Reviewed in the United States on April 13, 2025
Very convenient for building out your camera rig. Really like having the ability to mount my SSD so close to the USB-C port for better cord management.Need to get some extra hex socket screws if you want to attach anything more than just what comes with it, but that’s easy enough to do.
Fateh
Reviewed in Canada on June 30, 2022
I definitely recommend it :) super happy with it!
Christian Knudsen
Reviewed in Canada on February 7, 2022
Overall, it's a decent cage but I specifically purchased this one because it advertised that it came with a Nato detachable handle. Unfortunately, as you can see in the photo it came with the regular screw on kind. It's not such a great deal without the Nato handle (and it was specifically what I wanted), so I will be returning.
MRQ
Reviewed in Canada on February 15, 2021
Alright, it’s my first ever purchase for camera rig, it was a bit confusing to how setup this rig, but overall, it’s a solid metal rig, but the only problem was that the manufacture has to provide a user manual for making the setup easier.Happy with the purchase, actually I found it cheaper somewhere else by almost half of the price ☺️.
adrian guasina
Reviewed in Canada on September 21, 2020
Honestly, a must have for the BMPCC 4K and 6K (I own both). This cage is so useful. Almost acts like a gimbal, because I mounted a Newer external battery pack to the bottom, adding weight which equals stability. The perfect little unit. Also protects the BMPCC nicely
James Drake
Reviewed in the United States on August 31, 2020
The quick nato rail handle on this cage is fantastic in the package. I mount an external monitor on top of the handle and love the setup. Plenty of mounting options as you’d expect, a perfect fit, this will never leave my camera setup!
C
Reviewed in the United States on August 22, 2020
It took me about 10 minutes to get my BMPCC, external drive, and mic attached. Some reviewers wish that MagicRig included instructions—if you played with LEGOS as a kid, you'll have no trouble putting this together. Take a good look at the product images.I was pleasantly surprised at how sturdy and high quality the MagicRig is. I was going to shell out more for the SmallRig gear but am so glad I took a chance on this. No regrets and saved some cash in the process.
AMS
Reviewed in the United States on May 7, 2020
Sturdy but ZERO DOCUMENTATION and ZERO INFO ABOUT ADD-ON PARTS/SCREWS THAT ARE COMPATIBLE IF YOU WANT TO ADD ONThe Drive holder blocks the cold shoe (where I wanted to mount a microphone) unless you buy extra screws (you have to figure out on your own)Come on guys - read Geoff Moore's Gorilla Game and Crossing the Chasm books.. The bit about the "whole product"You missed out on providing a good customer experience and an upsell opp.Would I buy again - Yes. Would I recommend to others - Only if I could show them what to do
Patricio Munoz
Reviewed in Canada on October 5, 2020
I love Smallrig, they build quality products but the BMPCC6K cage is considerably more expensive than this MAGICRIG which looks almost identical. I saw reviews saying it was a good build quality which helped me to take the gamble on it. It is good quality. Those complaining about no instructions and not knowing how to connect this thing, wow. You don't need instructions for this, it's not rocket science. It really isn't. Anyway long story short, this is a good build quality. Came in a nice package, nicely protected. Camera looks awesome with it protected in this cage. Feels good. I'm a happy customer. I still have a lot of faith in SmallRig and prefer this brand first but I won't lie, if MagicRig offers something comparable at a lower cost, if the price different is substantial enough, I'd consider it. I have a SmallRig cage for my Canon EOS M50 and I LOVE it. This feels the same. It's a must have for these cameras. A++
Josh
Reviewed in the United States on September 19, 2019
I love it when I buy a product from a brand I don’t know and it ends up being awesome and not a regret. I’m very impressed with the quality of the rig for the money. It’s definitely a great value when you add up what it would cost to get all of the add ones like top handle with nato rails and ssd holder. It’s exactly what hat I needed for my BMPCC6K to hold all of my accessories. I was about to buy one that was almost double this price but I’m glad I didn’t, this one is just as good (I know because I have experience with the much more expensive one). Now the camera’s finally ready for prime time. I’d recommend this rig! (I’ll update my review if my opinion changes after use)
J
Reviewed in the United States on October 7, 2019
This is identical to my SmallRig cage that I love and paid more for. I've seen knockoffs, but I am struggling to find any differences between the SmallRig and the MagicRig. This is a great cage made better by being about 50% cheaper, with no difference in materials or product quality.
Paisley Greer
Reviewed in the United States on October 12, 2019
I was actually really surprised with how well this cage worked for my BMPCC. I was hesitant to buy it at first and was about to go double price with the Tilta, but thought I would give it a try.WOW! It actually fits great and doesn’t obstruct anything on the camera. I can make all the necessary attachments I need and it’s very sturdy and good quality. Great buy!
Recommended Products