Your cart is empty.
Your cart is empty.Koby j.
Reviewed in the United States on February 26, 2025
2004 S10 Crew Cab. Installing this was a massive pain - partially unrelated to the product.After removing the heads of the rivets and removing the OEM motor. There was practically no way to get the old rivets out from behind. I was able to get two out with a lot of hassle, the bottom left by moving the window just enough to clear the regulator from behind allowing me to pull out the rivet. And then by grinding out the top right one until it was small enough to poke out.GIVE YOURSELF SOME TIME to do this. I went the zip tie route because there was no way to use the included bolts since there was no room behind the holes to feed them through. Even if I could, Iām sure the nuts or heads of the bolts would seize up in the regulator.
KW
Reviewed in the United States on April 1, 2025
This motor is designed to accommodate many different vehicles. 3 different adapters are included for this purpose. Motor works fine. However, modifications were required to make it fit. Its dimensions are larger than oem. 1999 Buick Lesabre.
Braun22
Reviewed in the United States on March 22, 2024
Sprocket was too large, didn't fit my regulator
Chuck Hoffmann
Reviewed in the United States on December 8, 2024
This was a crazy easy install that took around 10 minutes. It works good.
Billy Channel
Reviewed in the United States on December 3, 2024
This motor fit our car and works fine!
MBJ
Reviewed in the United States on November 27, 2024
Replacement for faulty window motor. Has been working well for a few months now in a daily driver.
Mike L.
Reviewed in Canada on July 2, 2023
Mine came with 3 different connectors and new nuts and bolts. ( Not mentioned in description) But only 2 long bolts to mount motor to regulator. Factory used 3 rivets to secure motor to regulator. But seems fine with just the 2 bolts. The other 4 short bolts are used to mount regulator to door. Best to have someone around to help lift window, while you re-install motor/regulator assembly. It was a PITA to do by myself, after struggling to reinstall because I got 1 of the rollers jammed in the track. I called a buddy and it went in in less than 5 minutes...lol!
Martin Stewart
Reviewed in the United States on April 5, 2023
yup works
Cindye Worley
Reviewed in the United States on September 27, 2022
This motor replaced the original perfectly. Works well. It is an install I would say above average, but this product functions well.
Recommended Products