Your cart is empty.
Your cart is empty.Product Description
Channel With Diffuser
End Caps
Mounting Kit
PMMA Tape
The Testing Report For Light Effect With Or Without Frosted Cover
The UV Resistance Milky Cover With a Good Balance Between Light Transmittance and Aesthetics
1. 90% Light Transmittance Rate For The PC Material
2. Correlated Color Temperature Shift Within 3%
3. Color Redering Index Shift Within 1.5%
4.Light Loss Compared With Bared Strip Around 20%
Diffusion Effect For The Strip With Channel and Diffuser
THMOOTHER is Specializing In LED Strip Channel Diffuser .With Our Product ,Your Strip Light Will be Smoother .
When It Comes to Spotty/Dotty LED Effect, People Often Think a Diffuser Will Solve this Outright. But That Is Not True ,Diffusion Effect Depends
on 2 Things:
1. The Number Of LEDs Per Meter
2. The Depth of The Profile
Hence When Using LED Tapes Such As Those Which Only Have 30 LEDs Per Meter, No Amount Of Diffuser is Going To Make It Looks Seamless. If This Effect is Desired, We Recommend High Intensity Diode Like 180 LED Per Meter Or More For a Spotless Constant Glow .Powerful LED Strip Or RGBIC ,RGBW Tape Will Also Have A Better Diffusion Effect .
LED Strip Recessed Channel With Flange Installation and Connection
The Channel Fit For LED Strip Light Less Than 1/2 Inch Wide Which Include Single color, Tunable white, RGB and RGBW Programmable LED strip lights
It can be Installed By 3 Ways :
1. Mounting Clips -The Bracket is Fixed By Screw and Can Also Be Used as a Connector Between Two Aluminum Profiles For Extension
Min Groove Size W20XH7MM
2. Double Sided Tape - The Double Sided Tape Is Used For Suface Mounted
Min Groove Size W17.5XH5MM
3. Drill Hole On Channel And Mounting By Screw - Need to Be Drilled By Customer
Min Groove Size W17.5XH5MM
For Cornner Connection
The Channel Can be Connected By 45 Degree Mitre