Your cart is empty.
Your cart is empty.3PACK 3-Inch(75mm) 36T TCT Circular Saw Blade with 3/8-Inch(9.5mm) Arbor, Fast Clean Wood Plastic Cutting Cut-Off Wheel Compatible with Ryobi Milwaukee Dewalt Bosch Cut Off Saw
Mr. B
Reviewed in the United States on February 9, 2025
On my m12 cut off worked pretty good. Had to sand the arbor hole a bit. Perhaps too much paint.
Craig Cottrell
Reviewed in the United States on February 25, 2025
Works great on my M12 grinder.
russell flint jr.
Reviewed in the United States on February 24, 2025
works great just what i needed
Ian P
Reviewed in Australia on February 17, 2025
Works well with my Milwaukee tool when cutting wood and plastic. The only issue is the 3/8" mounting hole needs to be opened out to suit the 10mm Milwaukee spindle.
Dissatisfied
Reviewed in the United States on February 1, 2025
Arbor holes were slightly smaller than 3/8 and had to be drilled out to work on the saw
Jocko
Reviewed in the United States on January 30, 2025
Be careful very sharp, my saw (with guards installed) still tried to grab my glove. While it only damaged a left glove; be safe on cuts
Good but..
Reviewed in the United States on January 29, 2025
I'd give these 6 stars if I could. These truly are miniature carbide tipped circle saw blades. Very strong & solid blade. Using my Dewalt die grinder, I cut some pine 2x4s and some thick wall PVC. Went through them like warm butter. Regarding the Arbor hole: The arbor I used fit very snug (at first) into the blade. I did some measuring and observations under a low power microscope. 3/8" = 0.375. My arbor is 0.3705. All three saw blades are 0.373, after cleaning out. The arbor hole on each blade had overspray on the entire surface, which will reduce the diameter of the arbor hole. The overspray is from either a sealer or the paint. Using a Q-tip dipped in 99% Isopropyl Alcohol it wiped off pretty easily. That may be all you need to do. It really does need to fit snug so you don't get any wobble. HIGHLY recommend!
Ann A.
Reviewed in the United States on January 21, 2025
Probably could have used lower tooth count at 20k RPM. Well made.
Ebonweaver
Reviewed in the United States on September 15, 2024
Title says it all. These are not 3/8" and will not fit a 3/8" arbor tool. I suspect the issue is these are made in China and actually conform to the 9.5mm specification listed which is slightly smaller than 3/8". I assumed they would actually be 3/8 per the primary dimension listed and would also work on 9.5mm because that tiny bit larger would still let it work on a metric tool. Nope! These need to be flat listed as 9.5mm, period. I'm going to see if I can use a metal file to get me enough room to actually use these now that I opened the blister pack only to find out the dimensions are a lie. Real shame because they seem to be great blades otherwise, but when you're dealing with precisely machined dimensions you can't fudge things.
David
Reviewed in the United Arab Emirates on October 20, 2024
As Described.
Recommended Products
